Description
The Ball Valve mounted on trunnion A of the D series of CAMERON has a two-piece casting body and a bolted construction that allows dismantling in the workplace to facilitate service and repair. ANSI classes 150 to 900 and from 2 "to 6" (50 mm to 150 mm), ANSI Classes 1500 and 5000 psi. The Valves are available with lever, gear operator or bare shank for the drive. Cast iron body of two and three pieces and a bolted construction that allows dismantling in the workplace to facilitate service and repair. The Valves are available with lever, gear operator or bare stem for the drive.
Valve Details:
Brand: AOP
Complete port: Series D: 2 “ to 12” (50 mm to 305 mm)
Presures: Until 5000 PSI.
Class: ANSI 150 to 2500
Technical specifications
Ball mounted on stump. Anti-burst stem.
Stem separated from the ball to avoid lateral loading.
Double barrier stem joints.
Self-relief seats. Double blockage and bleeding.
Self-lubricating PTFE bushing bearings reinforced with metal and thrust washers to reduce torque and extend service life.
Carbon steel made of stainless steel or stainless steel.
6FP to 12FP emergency seal injection gaskets CL150 to CL900, 2FP to 4FP CL1500 and 5000.
Valve of body purge 2FP to 4FP CL150 to CL900.
Fixed external stop for Valves actuated by lever and stops positioned in factory for Valves driven by gear with external reference for open and closed positions.
Repair in the field. ENDURO-BOND ™ available.
Standar requirement
ANSI B16.5 ANSI 16.10
ASME VIII, Div. yo
NACE MR-0175 / ISO 15156 Coating
API 607 available .
